Professional Water Leak Detection Services in Pooler, GA
The number one plumbing issue you have to look out for is leaks. Plumbing leaks might not seem like a huge deal, but even a small leak can contribute to significant water damage in your home. Unfortunately, identifying leaks is not always easy. They often develop in hidden areas.
Mr. Leak Detection is your go-to provider when you need professional leak detection in Pooler, GA. We quickly identify plumbing leaks. We then put together a strategy to fix them and remediate any water damage.
When it comes to plumbing leaks, you shouldn’t procrastinate fixing them. Contact us today to schedule leak detection services in Georgia!
Leak Detection Services We Offer
We specialize in water leak detection, a highly specialized service where we identify and fix problematic leaks. To that end, we offer a wide range of leak detection services, including:
- Plumbing leaks
- Foundation leaks
- Slab leaks
- Underground and hidden leaks
Our goal is to identify and find leaks before they can cause major problems. We use the latest techniques and technologies to accurately identify compromised sections of your plumbing. You then can seek the repairs you need.
Common Places for Leaks
Finding a plumbing leak is tough because it often occurs in an out-of-the-way location. Knowing where leaks commonly appear can help you spot the signs faster.
Water Line
Your water line is the main source of water for your home. With so much water moving through this line, leaks are not uncommon.
Your water line usually runs through your yard. Leaks in your line can create puddles and spots of overly green grass in your yard. Leaks in water mains can also crack and damage nearby drywall, concrete, and flooring.
Because they are the main source of water in your home, water line leaks can waste a lot of water.
Crawl Spaces
Crawl spaces are susceptible to developing leaks because they often have exposed plumbing and piping. Crawl space leaks are tricky to diagnose. Unless you regularly check the area for them, leaks can go undetected for quite a while.
Crawl space leaks often are close to the foundation of your home. Even if they are not immediately visible, they can still cause significant damage in a short amount of time.
Walls and Floors
The most common places you will see damage from leaks are in the walls or floors. Drywall in particular absorbs water from nearby leaks, causing the material to swell and become soft. Water also tends to collect across the top flooring, naturally moving to the lowest spot in the room.
Slab Leaks
In some cases, leaks can start under the concrete foundation of your house. Many plumbing fixtures and pipes come through the concrete slab or foundation, so when leaks start, the concrete readily absorbs the nearby moisture.
Slab and Foundation Leaks
Slab and foundation leaks are particularly damaging. Water that leaks into your foundation can expand during freezing temperatures, leading to deep cracks and fissures in the slab itself. A cracked foundation can shift or sink into the earth, compromising your home’s structural integrity.
For example, many load-bearing walls in your home mount to the foundation. They might move and shift as the foundation cracks.
Foundation leaks are often the result of a leaky pipe or broken plumbing fixture. Other common causes are improper drainage in your basement, a broken sump pump, and soil changes occurring in your landscaping. Your home may also be at risk of foundation leaks during external flooding or periods of high rain.
Slab Leak Repair Options
Water leak repair in Pooler, GA, is a large, challenging project when it involves a slab. Two of the most common slab leak repair methods are spot repairs and re-piping the area.
- Spot repair works for smaller leaks. It involves opening up the slab to directly access the damaged pipes and affected area.
- Re-piping is necessary for more significant slab damage. With re-piping, the plumbers will remove the majority of the concrete slab and replace all piping inside. They then replace the concrete. The typical re-piping job takes about two days.
Which slab repair option you need depends on the size and scope of the leak. A professional plumber can diagnose any slab leaks and determine the best course of action.
How We Locate Leaks
The trick to dealing with leaks is identifying and locating them as quickly as possible. We use two primary methods of leak detection in Pooler, GA.
Acoustic Leak Detection
Acoustic leak detection uses precise sound waves and sensors to identify and locate plumbing leaks. Our technicians will attach sound sensors to strategic contact points on your pipes and fixtures. These sound sensors send small vibrations down the pipe wall. We then can measure these signals to determine whether any leaks or holes exist.
Acoustic detection practices are ideal because they don’t require exposing and infiltrating existing plumbing. This represents a non-invasive means of leak detection in Pooler, Georgia.
Video Pipe Inspection
Another method of leak detection involves using digital video feeds. The most common form is using a snake camera, which is a flexible rod with a small camera at the end. We can feed the snake camera into your pipes and look for any leaks or damage.
Another method of video detection is using a thermal imaging camera. Leaks often form pockets where heat and moisture are higher than normal. A thermal camera in your walls can detect the temperature differences that indicate a leak.
Can Leak Detection Damage My Foundation?
Older methods of slab leak detection repair often required tearing up the concrete to locate leaks. However, our non-invasive services for plumbing leak detection in Pooler, GA, do not put your concrete foundation at risk.
Our acoustic, video, and thermal leak detections can accurately find plumbing system damage without having to remove sections of your plumbing or concrete. This approach saves time and money for you.
How Much Water Does a Leak Waste?
One smart reason to fix a leak is the significant amount of water leaks waste. The average home can lose up to 10,000 gallons of water from its leaks.
Even a small leak can cause a noticeable spike in your water bills. According to the EPA, about 10% of American homes have at least one leak that wastes up to 90 gallons of water per day.
From another perspective, fixing existing leaks can reduce your water bill by more than 10% per year. Even though you have a cost for leak detection and Pooler plumbing repair, you often can recoup it through long-term savings on your water bill.
Signs of a Hidden Leak
Frequently, leaks occur behind walls. They aren’t immediately obvious to the naked eye. If you notice any of the following signs, you should call our leak detection experts. You likely have some kind of leak occurring in your home or commercial building.
Warm Spots
Water absorbs heat and creates moist spots, leading to pockets of heat near leaks. This is a key aspect of thermal leak detection. Depending on the size of the leak, you may be able to feel radiant heat near your flooring or walls.
High Water Bills
Another way to determine if you have a leak is to look at your water bills. If you notice any spikes in usage, a leak could be responsible.
You can measure your water usage through your water meter. Record your meter reading for one day of use and then rerecord it a few days later. If the meter shows higher usage than you expect, it could be because of a plumbing leak in your home.
Sounds of Running Water
Depending on the size of the leak, you may be able to hear dripping or running water in your walls or underneath the flooring. Appliances that use water and are leaking might also produce a rushing water sound. For example, a whooshing sound near your toilets is a common sign you have a toilet tank leak.
Mildew and Mold
Excessive moisture creates a fertile breeding ground for mold and mildew. They can appear as greenish-black streaks on your walls and flooring.
Mold and mildew are both significant health hazards. If you identify mold, you should call a professional as quickly as possible to remove it. Mold is particularly prone to grow in dark, damp spaces, such as inside crawl spaces and basements.
Peeling Paint and Wallpaper
Water from leaks can move underneath your wall paint, causing it to peel and fall off. You might start to notice bubbling or sagging in your walls. In some cases, pockets of water can form behind paint and create small holes where it leaks outward. If you have wallpaper, moisture from leaks can cause it to peel.
Damaged Walls and Flooring
If you have drywall, water absorption can cause it to swell and become soft. In some cases, the additional moisture can make the drywall so heavy it falls off its wall supports. If you have vinyl or laminate flooring, water leaks can form bubbles, warping, and ridges on your floor.
Bad Smells
An odd odor coming from a wall or floor is another common sign you have a leak somewhere in your home. Standing water behind your walls becomes a breeding ground for bacteria and microorganisms, which can create a musty, rancid smell.
Stains
Water leaks also cause stains and dark spots on your walls and ceiling. For example, if a pipe upstairs bursts, it can create dark stains on your ceiling. In most cases, stains on your walls are a sign that the drywall has damage and needs replacement.
Even Minor Leaks Need Repair
Even if a leak seems small, it’s in your best interest to get it fixed as quickly as possible. Water leak damage can build up over time until it creates significant damage.
Determining the scope of a leak can be challenging because it’s frequently hidden. Hiring a professional leak detection company is often the best option. Neglecting a leak problem commonly results in paying for expensive plumbing repairs down the line.
Why Choose Mr. Leak Detection?
You can’t afford to let leaks fester, so contacting a qualified professional should be your top priority. Mr. Leak Detection provides high-quality under-slab leak detection services in Pooler, GA, that you can trust. By using our services, you can identify leaks to prevent water damage, lower your water bills, and extend your plumbing system’s lifespan.
We understand that water leaks can be frustrating in your home. We use the latest technologies, such as infrared detection and moisture mapping, to quickly locate pesky leaks and reduce your level of stress.
Our goal is to provide hassle-free and streamlined leak detection in Pooler, GA. We are fully licensed and insured. We accept most types of homeowners insurance.
Most importantly, we offer a 100% satisfaction guarantee. We won’t stop working until you are completely satisfied with our results.
About Pooler, GA
Located just 15 minutes from Savannah’s historic district, Pooler GA, is a wonderful location for both residents and visitors. Pooler’s history dates back to the 19th century when it was an important stop on the railroad before Atlanta.
Today, Pooler is the economic center of Chatham County. It boasts low crime rates, excellent schools, and a laid-back, family-oriented atmosphere.
Pooler is near the Atlantic Ocean, making its beaches a prime attraction during the warm season. Visitors can stop by the famous National Museum of the Mighty Eighth Air Force or take a day trip to the Pooler Fun Zone amusement and sports park. During the beautiful summer season, you can visit Tom Triplett Community Park for hiking, disc golf, and other outdoor recreation opportunities.
Expert Water Leak Repair and Water Leak Detection in Pooler, GA
When water is the problem, we are the solution. Mr. Leak Detection has years of experience providing specialized Pooler leak detection and slab leak repair services. We pride ourselves on our reliable and affordable approach to addressing all your leak issues.
